This is my final QO-100 fixed setup with the SatRover:
- SatRover Mk 1 from PE1CKK
- 2.4 GHz Helix (as a part of SatRover)
- LNB a part of the SatRover, feed with normal 75 ohms TV cable coax
- 60 cm dish from Triax (TD64) branded as Canal Digital
- IC-705 as TRX
- 10 dB attenuator and a number of meters of Hyperflex 5 coax cable to make the output on 2.4 GHz at the Helix to aprox 100 mW (legal power limit in Sweden)
SatRover and the IC-705
2 svar på ”QO-100 SatRover fixed setup”
Hi Lars,
I have just bought the SatRover Mk1 and the IC-705 for portable and use and also to use home.
I have been having problems with RFI, I note that lots of other people have the same problem with RFI, too.
As I prefer DATA modes, (due to poor hearing) I would be grateful if you would share with me how you solved the problem of RFI when using DATA modes through QO-100.
Many thanks in advance.
73, Dave G1OCN.
Hi,
I will send you an e-mail.
73 Lars